Question 1

_____ occurs when a wheel hits a bump and moves up.

Accepted Answer

A)  Jounce
B)  Rebound
C)  Extension
D)  Deflection

Question 2

____________________ occurs when the wheel hits a dip or hole and moves downward.

Accepted Answer

The answer of ____________________ occurs when the wheel hits a...

Question 3

Unusual tire wear patterns can be caused by worn shock absorbers.

Accepted Answer

A) True 
 B)False

Question 4

Technician A says leaf springs may be made of cast iron. Technician B says leaf springs may be made from a fiber composite material. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  both A and B
D)  neither A nor B

Question 5

List at least four functions of the suspension system.

Accepted Answer

Supports the weight of the vehicle
Keep...

Question 6

Technician A says conventional shock absorbers dampen spring movement. Technician B says conventional shock absorbers absorb shock. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  both A and B
D)  neither A nor B

Question 7

The ____________________ bar provides directional stability by reducing body roll.

Accepted Answer

sway,antis...

Question 8

What controls the up-and-down movement of a vehicle as it moves down a bumpy road?

Accepted Answer

A)  struts
B)  shock absorbers
C)  both A and B
D)  neither A nor B

Question 9

Most passenger cars use a shock with a _____ ratio.

Accepted Answer

A)  40/60
B)  50/50
C)  80/20
D)  90/10

Question 10

After installing a new control arm bushing, the control arm end cap nuts or bolts should not be torqued until the vehicle _____.

Accepted Answer

A)  is at its curb height
B)  has been bounced and allowed to settle out
C)  has its front end aligned
D)  both A and B

Question 11

The faster a shock absorber moves, the more resistance it has to the movement.

Accepted Answer

A) True 
 B)False

Question 12

Suspension bushings are being discussed. Technician A says the rubber bushings used in a control arm flex and twist as the control arm moves up and down. Technician B says rubber bushings should be lubricated with petroleum-based lubricants every 30,000 miles. Who is correct?

Accepted Answer

A)  A only
B)  B only
C)  both A and B
D)  neither A nor B

Question 13

A weak spring will NOT cause _____.

Accepted Answer

A)  poor braking
B)  abnormal steering
C)  premature U-joint failure
D)  premature ball joint failure

Question 14

Which type of spring weighs the least?

Accepted Answer

A)  monoleaf
B)  multileaf
C)  fiberglass leaf
D)  quarter leaf

Question 15

When the shoulder on a grease fitting of a ball joint is flush with the housing, the ball joint should be replaced.

Accepted Answer

A) True 
 B)False

Question 16

Multileaf springs are fixed rate springs.

Accepted Answer

A) True 
 B)False

Question 17

What is the purpose of an air shock system?

Accepted Answer

An air shock system adjusts th...

Exam 46: Suspension Systems

After installing a new control arm bushing, the control arm end cap nuts or bolts should not be torqued until the vehicle _____.

Correct Answer
verified

Technician A says conventional shock absorbers dampen spring movement. Technician B says conventional shock absorbers absorb shock. Who is correct?

Correct Answer
verified

Most passenger cars use a shock with a _____ ratio.

Correct Answer
verified

____________________ occurs when the wheel hits a dip or hole and moves downward.

Correct Answer
verified

Technician A says leaf springs may be made of cast iron. Technician B says leaf springs may be made from a fiber composite material. Who is correct?

Correct Answer
verified

Suspension bushings are being discussed. Technician A says the rubber bushings used in a control arm flex and twist as the control arm moves up and down. Technician B says rubber bushings should be lubricated with petroleum-based lubricants every 30,000 miles. Who is correct?

Correct Answer
verified

What is the purpose of an air shock system?

Correct Answer
verified
An air shock system adjusts th...
View Answer

A weak spring will NOT cause _____.

Correct Answer
verified

List at least four functions of the suspension system.

Correct Answer
verified
Supports the weight of the vehicle
Keep...
View Answer

_____ occurs when a wheel hits a bump and moves up.

Correct Answer
verified

The faster a shock absorber moves, the more resistance it has to the movement.

Correct Answer
verified

Multileaf springs are fixed rate springs.

Correct Answer
verified

What controls the up-and-down movement of a vehicle as it moves down a bumpy road?

Correct Answer
verified

When the shoulder on a grease fitting of a ball joint is flush with the housing, the ball joint should be replaced.

Correct Answer
verified

Which type of spring weighs the least?

Correct Answer
verified

Unusual tire wear patterns can be caused by worn shock absorbers.

Correct Answer
verified

The ____________________ bar provides directional stability by reducing body roll.

Correct Answer
verified
sway,antis...
View Answer

Exam 46: Suspension Systems

After installing a new control arm bushing, the control arm end cap nuts or bolts should not be torqued until the vehicle _____.

Correct AnswerverifiedShow Answer

Technician A says conventional shock absorbers dampen spring movement. Technician B says conventional shock absorbers absorb shock. Who is correct?

Correct AnswerverifiedShow Answer

Most passenger cars use a shock with a _____ ratio.

Correct AnswerverifiedShow Answer

____________________ occurs when the wheel hits a dip or hole and moves downward.

Correct AnswerverifiedShow Answer

Technician A says leaf springs may be made of cast iron. Technician B says leaf springs may be made from a fiber composite material. Who is correct?

Correct AnswerverifiedShow Answer

Suspension bushings are being discussed. Technician A says the rubber bushings used in a control arm flex and twist as the control arm moves up and down. Technician B says rubber bushings should be lubricated with petroleum-based lubricants every 30,000 miles. Who is correct?

Correct AnswerverifiedShow Answer

What is the purpose of an air shock system?

Correct AnswerverifiedAn air shock system adjusts th...View AnswerShow Answer

A weak spring will NOT cause _____.

Correct AnswerverifiedShow Answer

List at least four functions of the suspension system.

Correct AnswerverifiedSupports the weight of the vehicle Keep...View AnswerShow Answer

_____ occurs when a wheel hits a bump and moves up.

Correct AnswerverifiedShow Answer

The faster a shock absorber moves, the more resistance it has to the movement.

Correct AnswerverifiedShow Answer

Multileaf springs are fixed rate springs.

Correct AnswerverifiedShow Answer

What controls the up-and-down movement of a vehicle as it moves down a bumpy road?

Correct AnswerverifiedShow Answer

When the shoulder on a grease fitting of a ball joint is flush with the housing, the ball joint should be replaced.

Correct AnswerverifiedShow Answer

Which type of spring weighs the least?

Correct AnswerverifiedShow Answer

Unusual tire wear patterns can be caused by worn shock absorbers.

Correct AnswerverifiedShow Answer

The ____________________ bar provides directional stability by reducing body roll.

Correct Answerverifiedsway,antis...View AnswerShow Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
An air shock system adjusts th...
View Answer

Correct Answer
verified

Correct Answer
verified
Supports the weight of the vehicle
Keep...
View Answer

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified

Correct Answer
verified
sway,antis...
View Answer