FiltersDone

Question type

Essay

Multiple Choice

Short Answer

True False

Matching

Exam 12: Pipe Welding With Multiple Processes

Show Answer

Share

---

All types

Filters

Study Flashcards

Question 1

Multiple Choice

Review LaterAdd Note

Review Later

The _____ technique is done by resting the cup on the workpiece. ​

A) freehand​
B) cup walking​
C) root pass​
D) wiggle​

Correct Answer

verified

Show Answer

Question 2

Essay

Review LaterAdd Note

Review Later

The first pass made with the SMAW process should be placed directly over the _____. ​

Correct Answer

verified

root pass

Question 3

Multiple Choice

Review LaterAdd Note

A drag travel angle is sometimes referred to as a _____ angle. ​

What is the purpose of a welding procedure specification? ​

The _____ technique is when the welder rests a hand on the workpiece or other support and controls the arc length by the way he or she holds the torch. ​

Name the techniques that are commonly used with the GTAW process. ​

Mild steel pipe is often prepared by beveling with the _____ process. ​

What are stringer beads??

It is important that when using any technique, the _____ is broken down so that complete fusion takes place. ​

What is the main advantage of using the GMAW process over the GTAW process? ​

There are _____ different techniques that are commonly used with the GTAW process. ​

The number of stringer beads required for the cover pass will depend on the _____ of the groove that is to be welded. ​

The 6G weld will be very similar to the _____, except that it will be tipped on its side. ​

A _____ is a flat-edge preparation that is placed at the end of a bevel joint. ​

A _____ is a document that provides in detail the required variables for a particular application. ​

In cup walking, the arc length is changed by varying the tungsten stickout, the cup _____, and the angle that the welder holds the torch. ​

When you start to run the cover passes, the number of stringer beads required and the width across the top of the groove opening will determine the size of _____ that you will use. ​

The first pass made with the SMAW process is typically referred to as the _____ pass. ​

If you have correctly placed the root pass, there will be no reason to _____ it. ​

Why is it important to know the advantages and disadvantages of welding processes. ​